Apache Module mod_rewrite

RewriteBase Directive

The RewriteBase directive explicitly sets the base URL for per-directory rewrites. As you will see below, RewriteRule can be used in per-directory config files (.htaccess). In such a case, it will act locally, stripping the local directory prefix before processing, and applying rewrite rules only to the remainder. When processing is complete, the prefix is automatically added back to the path. The default setting is; RewriteBase physical-directory-path

When a substitution occurs for a new URL, this module has to re-inject the URL into the server processing. To be able to do this it needs to know what the corresponding URL-prefix or URL-base is. By default this prefix is the corresponding filepath itself. However, for most websites, URLs are NOT directly related to physical filename paths, so this assumption will often be wrong! Therefore, you can use the RewriteBase directive to specify the correct URL-prefix.

For example, assume the following per-directory config file:

#
#  /abc/def/.htaccess -- per-dir config file for directory /abc/def
#  Remember: /abc/def is the physical path of /xyz, i.e., the server
#            has a 'Alias /xyz /abc/def' directive e.g.
#

RewriteEngine On

#  let the server know that we were reached via /xyz and not
#  via the physical path prefix /abc/def
RewriteBase   /xyz

#  now the rewriting rules
RewriteRule   ^oldstuff\.html$  newstuff.html

In the above example, a request to /xyz/oldstuff.html gets correctly rewritten to the physical file /abc/def/newstuff.html.

Request:
  /xyz/oldstuff.html

Internal Processing:
  /xyz/oldstuff.html     -> /abc/def/oldstuff.html  (per-server Alias)
  /abc/def/oldstuff.html -> /abc/def/newstuff.html  (per-dir    RewriteRule)
  /abc/def/newstuff.html -> /xyz/newstuff.html      (per-dir    RewriteBase)
  /xyz/newstuff.html     -> /abc/def/newstuff.html  (per-server Alias)

Result:
  /abc/def/newstuff.html

RewriteCond Directive

The RewriteCond directive defines a rule condition. One or more RewriteCond can precede a RewriteRule directive. The following rule is then only used if both the current state of the URI matches its pattern, and if these conditions are met.

TestString is a string which can contain the following expanded constructs in addition to plain text:

• RewriteRule backreferences: These are backreferences of the form $N (0 <= N <= 9), which provide access to the grouped parts (in parentheses) of the pattern, from the RewriteRule which is subject to the current set of RewriteCond conditions..
• RewriteCond backreferences: These are backreferences of the form %N (1 <= N <= 9), which provide access to the grouped parts (again, in parentheses) of the pattern, from the last matched RewriteCond in the current set of conditions.
• RewriteMap expansions: These are expansions of the form ${mapname:key|default}. See the documentation for RewriteMap for more details.
• Server-Variables: These are variables of the form %{ NAME_OF_VARIABLE } where NAME_OF_VARIABLE can be a string taken from the following list:

  HTTP headers:	connection & request:
  HTTP_USER_AGENT HTTP_REFERER HTTP_COOKIE HTTP_FORWARDED HTTP_HOST HTTP_PROXY_CONNECTION HTTP_ACCEPT	REMOTE_ADDR REMOTE_HOST REMOTE_PORT REMOTE_USER REMOTE_IDENT REQUEST_METHOD SCRIPT_FILENAME PATH_INFO QUERY_STRING AUTH_TYPE
  server internals:	date and time:	specials:
  DOCUMENT_ROOT SERVER_ADMIN SERVER_NAME SERVER_ADDR SERVER_PORT SERVER_PROTOCOL SERVER_SOFTWARE	TIME_YEAR TIME_MON TIME_DAY TIME_HOUR TIME_MIN TIME_SEC TIME_WDAY TIME	API_VERSION THE_REQUEST REQUEST_URI REQUEST_FILENAME IS_SUBREQ HTTPS

  These variables all correspond to the similarly named HTTP MIME-headers, C variables of the Apache server or struct tm fields of the Unix system. Most are documented elsewhere in the Manual or in the CGI specification. Those that are special to mod_rewrite include those below.

  IS_SUBREQ

  Will contain the text "true" if the request currently being processed is a sub-request, "false" otherwise. Sub-requests may be generated by modules that need to resolve additional files or URIs in order to complete their tasks.

  API_VERSION

  This is the version of the Apache module API (the internal interface between server and module) in the current httpd build, as defined in include/ap_mmn.h. The module API version corresponds to the version of Apache in use (in the release version of Apache 1.3.14, for instance, it is 19990320:10), but is mainly of interest to module authors.

  THE_REQUEST

  The full HTTP request line sent by the browser to the server (e.g., "GET /index.html HTTP/1.1"). This does not include any additional headers sent by the browser.

  REQUEST_URI

  The resource requested in the HTTP request line. (In the example above, this would be "/index.html".)

  REQUEST_FILENAME

  The full local filesystem path to the file or script matching the request.

  HTTPS

  Will contain the text "on" if the connection is using SSL/TLS, or "off" otherwise. (This variable can be safely used regardless of whether or not mod_ssl is loaded).

Other things you should be aware of:

1. The variables SCRIPT_FILENAME and REQUEST_FILENAME contain the same value - the value of the filename field of the internal request_rec structure of the Apache server. The first name is the commonly known CGI variable name while the second is the appropriate counterpart of REQUEST_URI (which contains the value of the uri field of request_rec).
2. %{ENV:variable}, where variable can be any environment variable, is also available. This is looked-up via internal Apache structures and (if not found there) via getenv() from the Apache server process.
3. %{SSL:variable}, where variable is the name of an SSL environment variable, can be used whether or not mod_ssl is loaded, but will always expand to the empty string if it is not. Example: %{SSL:SSL_CIPHER_USEKEYSIZE} may expand to 128.
4. %{HTTP:header}, where header can be any HTTP MIME-header name, can always be used to obtain the value of a header sent in the HTTP request. Example: %{HTTP:Proxy-Connection} is the value of the HTTP header ``Proxy-Connection:''.

   If a HTTP header is used in a condition this header is added to the Vary header of the response in case the condition evaluates to to true for the request. It is not added if the condition evaluates to false for the request. Adding the HTTP header to the Vary header of the response is needed for proper caching.

   It has to be kept in mind that conditions follow a short circuit logic in the case of the 'ornext|OR' flag so that certain conditions might not be evaluated at all.

5. %{LA-U:variable} can be used for look-aheads which perform an internal (URL-based) sub-request to determine the final value of variable. This can be used to access variable for rewriting which is not available at the current stage, but will be set in a later phase.

   For instance, to rewrite according to the REMOTE_USER variable from within the per-server context (httpd.conf file) you must use %{LA-U:REMOTE_USER} - this variable is set by the authorization phases, which come after the URL translation phase (during which mod_rewrite operates).

   On the other hand, because mod_rewrite implements its per-directory context (.htaccess file) via the Fixup phase of the API and because the authorization phases come before this phase, you just can use %{REMOTE_USER} in that context.

6. %{LA-F:variable} can be used to perform an internal (filename-based) sub-request, to determine the final value of variable. Most of the time, this is the same as LA-U above.

CondPattern is the condition pattern, a regular expression which is applied to the current instance of the TestString. TestString is first evaluated, before being matched against CondPattern.

Remember: CondPattern is a perl compatible regular expression with some additions:

1. You can prefix the pattern string with a '!' character (exclamation mark) to specify a non-matching pattern.
2. There are some special variants of CondPatterns. Instead of real regular expression strings you can also use one of the following:
   • '<CondPattern' (lexicographically precedes)
     Treats the CondPattern as a plain string and compares it lexicographically to TestString. True if TestString lexicographically precedes CondPattern.
   • '>CondPattern' (lexicographically follows)
     Treats the CondPattern as a plain string and compares it lexicographically to TestString. True if TestString lexicographically follows CondPattern.
   • '=CondPattern' (lexicographically equal)
     Treats the CondPattern as a plain string and compares it lexicographically to TestString. True if TestString is lexicographically equal to CondPattern (the two strings are exactly equal, character for character). If CondPattern is "" (two quotation marks) this compares TestString to the empty string.
   • '-d' (is directory)
     Treats the TestString as a pathname and tests whether or not it exists, and is a directory.
   • '-f' (is regular file)
     Treats the TestString as a pathname and tests whether or not it exists, and is a regular file.
   • '-s' (is regular file, with size)
     Treats the TestString as a pathname and tests whether or not it exists, and is a regular file with size greater than zero.
   • '-l' (is symbolic link)
     Treats the TestString as a pathname and tests whether or not it exists, and is a symbolic link.
   • '-x' (has executable permissions)
     Treats the TestString as a pathname and tests whether or not it exists, and has executable permissions. These permissions are determined according to the underlying OS.
   • '-F' (is existing file, via subrequest)
     Checks whether or not TestString is a valid file, accessible via all the server's currently-configured access controls for that path. This uses an internal subrequest to do the check, so use it with care - it can impact your server's performance!
   • '-U' (is existing URL, via subrequest)
     Checks whether or not TestString is a valid URL, accessible via all the server's currently-configured access controls for that path. This uses an internal subrequest to do the check, so use it with care - it can impact your server's performance!

   Note:

   All of these tests can also be prefixed by an exclamation mark ('!') to negate their meaning.
3. You can also set special flags for CondPattern by appending [flags] as the third argument to the RewriteCond directive, where flags is a comma-separated list of any of the following flags:
   • 'nocase|NC' (no case)
     This makes the test case-insensitive - differences between 'A-Z' and 'a-z' are ignored, both in the expanded TestString and the CondPattern. This flag is effective only for comparisons between TestString and CondPattern. It has no effect on filesystem and subrequest checks.
   • 'ornext|OR' (or next condition)
     Use this to combine rule conditions with a local OR instead of the implicit AND. Typical example:

     RewriteCond %{REMOTE_HOST}  ^host1.*  [OR]
     RewriteCond %{REMOTE_HOST}  ^host2.*  [OR]
     RewriteCond %{REMOTE_HOST}  ^host3.*
     RewriteRule ...some special stuff for any of these hosts...
     

     Without this flag you would have to write the condition/rule pair three times.
   • 'novary|NV' (no vary)
     If a HTTP header is used in the condition, this flag prevents this header from being added to the Vary header of the response.
     Using this flag might break proper caching of the response if the representation of this response varies on the value of this header. So this flag should be only used if the meaning of the Vary header is well understood.

Example:

To rewrite the Homepage of a site according to the ``User-Agent:'' header of the request, you can use the following:

RewriteCond  %{HTTP_USER_AGENT}  ^Mozilla.*
RewriteRule  ^/$                 /homepage.max.html  [L]

RewriteCond  %{HTTP_USER_AGENT}  ^Lynx.*
RewriteRule  ^/$                 /homepage.min.html  [L]

RewriteRule  ^/$                 /homepage.std.html  [L]

Explanation: If you use a browser which identifies itself as 'Mozilla' (including Netscape Navigator, Mozilla etc), then you get the max homepage (which could include frames, or other special features). If you use the Lynx browser (which is terminal-based), then you get the min homepage (which could be a version designed for easy, text-only browsing). If neither of these conditions apply (you use any other browser, or your browser identifies itself as something non-standard), you get the std (standard) homepage.

RewriteEngine Directive

The RewriteEngine directive enables or disables the runtime rewriting engine. If it is set to off this module does no runtime processing at all. It does not even update the SCRIPT_URx environment variables.

Use this directive to disable the module instead of commenting out all the RewriteRule directives!

Note that rewrite configurations are not inherited by virtual hosts. This means that you need to have a RewriteEngine on directive for each virtual host in which you wish to use rewrite rules.

RewriteLock Directive

This directive sets the filename for a synchronization lockfile which mod_rewrite needs to communicate with RewriteMap programs. Set this lockfile to a local path (not on a NFS-mounted device) when you want to use a rewriting map-program. It is not required for other types of rewriting maps.

RewriteLog Directive

The RewriteLog directive sets the name of the file to which the server logs any rewriting actions it performs. If the name does not begin with a slash ('/') then it is assumed to be relative to the Server Root. The directive should occur only once per server config.

RewriteLogLevel Directive

The RewriteLogLevel directive sets the verbosity level of the rewriting logfile. The default level 0 means no logging, while 9 or more means that practically all actions are logged.

To disable the logging of rewriting actions simply set Level to 0. This disables all rewrite action logs.

RewriteMap Directive

The RewriteMap directive defines a Rewriting Map which can be used inside rule substitution strings by the mapping-functions to insert/substitute fields through a key lookup. The source of this lookup can be of various types.

The MapName is the name of the map and will be used to specify a mapping-function for the substitution strings of a rewriting rule via one of the following constructs:

${ MapName : LookupKey }
${ MapName : LookupKey | DefaultValue }

When such a construct occurs, the map MapName is consulted and the key LookupKey is looked-up. If the key is found, the map-function construct is substituted by SubstValue. If the key is not found then it is substituted by DefaultValue or by the empty string if no DefaultValue was specified.

For example, you might define a RewriteMap as:

You would then be able to use this map in a RewriteRule as follows:

The following combinations for MapType and MapSource can be used:

• Standard Plain Text
  MapType: txt, MapSource: Unix filesystem path to valid regular file

  This is the standard rewriting map feature where the MapSource is a plain ASCII file containing either blank lines, comment lines (starting with a '#' character) or pairs like the following - one per line.

  MatchingKey SubstValue

  Example

  ##
  ##  map.txt -- rewriting map
  ##
  
  Ralf.S.Engelschall    rse   # Bastard Operator From Hell
  Mr.Joe.Average        joe   # Mr. Average
  

  RewriteMap real-to-user txt:/path/to/file/map.txt

• Randomized Plain Text
  MapType: rnd, MapSource: Unix filesystem path to valid regular file

  This is identical to the Standard Plain Text variant above but with a special post-processing feature: After looking up a value it is parsed according to contained ``|'' characters which have the meaning of ``or''. In other words they indicate a set of alternatives from which the actual returned value is chosen randomly. For example, you might use the following map file and directives to provide a random load balancing between several back-end server, via a reverse-proxy. Images are sent to one of the servers in the 'static' pool, while everything else is sent to one of the 'dynamic' pool.

  Example:

  Rewrite map file

  ##
  ##  map.txt -- rewriting map
  ##
  
  static   www1|www2|www3|www4
  dynamic  www5|www6
  

  Configuration directives

  RewriteMap servers rnd:/path/to/file/map.txt

RewriteRule ^/(.*\.(png|gif|jpg)) http://${servers:static}/$1 [NC,P,L]
RewriteRule ^/(.*) http://${servers:dynamic}/$1 [P,L]

• Hash File
  MapType: dbm[=type], MapSource: Unix filesystem path to valid regular file

  Here the source is a binary format DBM file containing the same contents as a Plain Text format file, but in a special representation which is optimized for really fast lookups. The type can be sdbm, gdbm, ndbm, or db depending on compile-time settings. If the type is omitted, the compile-time default will be chosen.

  To create a dbm file from a source text file, use the httxt2dbm utility.

  $ httxt2dbm -i mapfile.txt -o mapfile.map

• Internal Function
  MapType: int, MapSource: Internal Apache function

  Here, the source is an internal Apache function. Currently you cannot create your own, but the following functions already exist:

  • toupper:
    Converts the key to all upper case.
  • tolower:
    Converts the key to all lower case.
  • escape:
    Translates special characters in the key to hex-encodings.
  • unescape:
    Translates hex-encodings in the key back to special characters.
• External Rewriting Program
  MapType: prg, MapSource: Unix filesystem path to valid regular file

  Here the source is a program, not a map file. To create it you can use a language of your choice, but the result has to be an executable program (either object-code or a script with the magic cookie trick '#!/path/to/interpreter' as the first line).

  This program is started once, when the Apache server is started, and then communicates with the rewriting engine via its stdin and stdout file-handles. For each map-function lookup it will receive the key to lookup as a newline-terminated string on stdin. It then has to give back the looked-up value as a newline-terminated string on stdout or the four-character string ``NULL'' if it fails (i.e., there is no corresponding value for the given key). A trivial program which will implement a 1:1 map (i.e., key == value) could be:

  #!/usr/bin/perl
  $| = 1;
  while (<STDIN>) {
      # ...put here any transformations or lookups...
      print $_;
  }
  

  But be very careful:

  1. ``Keep it simple, stupid'' (KISS). If this program hangs, it will cause Apache to hang when trying to use the relevant rewrite rule.
  2. A common mistake is to use buffered I/O on stdout. Avoid this, as it will cause a deadloop! ``$|=1'' is used above, to prevent this.
  3. The RewriteLock directive can be used to define a lockfile which mod_rewrite can use to synchronize communication with the mapping program. By default no such synchronization takes place.

The RewriteMap directive can occur more than once. For each mapping-function use one RewriteMap directive to declare its rewriting mapfile. While you cannot declare a map in per-directory context it is of course possible to use this map in per-directory context.

RewriteOptions Directive

The RewriteOptions directive sets some special options for the current per-server or per-directory configuration. The Option string can currently only be one of the following:

inherit

This forces the current configuration to inherit the configuration of the parent. In per-virtual-server context, this means that the maps, conditions and rules of the main server are inherited. In per-directory context this means that conditions and rules of the parent directory's .htaccess configuration are inherited.

RewriteRule Directive

The RewriteRule directive is the real rewriting workhorse. The directive can occur more than once, with each instance defining a single rewrite rule. The order in which these rules are defined is important - this is the order in which they will be applied at run-time.

Pattern is a perl compatible regular expression. On the first RewriteRule it is applied to the URL-path of the request; subsequent patterns are applied to the output of the last matched RewriteRule.

For some hints on regular expressions, see the mod_rewrite Introduction.

In mod_rewrite, the NOT character ('!') is also available as a possible pattern prefix. This enables you to negate a pattern; to say, for instance: ``if the current URL does NOT match this pattern''. This can be used for exceptional cases, where it is easier to match the negative pattern, or as a last default rule.

The Substitution of a rewrite rule is the string that replaces the original URL-path that was matched by Pattern. The Substitution may be a:

file-system path

Designates the location on the file-system of the resource to be delivered to the client.

URL-path

A DocumentRoot-relative path to the resource to be served. Note that mod_rewrite tries to guess whether you have specified a file-system path or a URL-path by checking to see if the first segment of the path exists at the root of the file-system. For example, if you specify a Substitution string of /www/file.html, then this will be treated as a URL-path unless a directory named www exists at the root or your file-system, in which case it will be treated as a file-system path. If you wish other URL-mapping directives (such as Alias) to be applied to the resulting URL-path, use the [PT] flag as described below.

Absolute URL

If an absolute URL is specified, mod_rewrite checks to see whether the hostname matches the current host. If it does, the scheme and hostname are stripped out and the resulting path is treated as a URL-path. Otherwise, an external redirect is performed for the given URL. To force an external redirect back to the current host, see the [R] flag below.

- (dash)

A dash indicates that no substitution should be performed (the existing path is passed through untouched). This is used when a flag (see below) needs to be applied without changing the path.

In addition to plain text, the Substition string can include

1. back-references ($N) to the RewriteRule pattern
2. back-references (%N) to the last matched RewriteCond pattern
3. server-variables as in rule condition test-strings (%{VARNAME})
4. mapping-function calls (${mapname:key|default})

Back-references are identifiers of the form $N (N=0..9), which will be replaced by the contents of the Nth group of the matched Pattern. The server-variables are the same as for the TestString of a RewriteCond directive. The mapping-functions come from the RewriteMap directive and are explained there. These three types of variables are expanded in the order above.

As already mentioned, all rewrite rules are applied to the Substitution (in the order in which they are defined in the config file). The URL is completely replaced by the Substitution and the rewriting process continues until all rules have been applied, or it is explicitly terminated by a L flag.

Additionally you can set special actions to be performed by appending [flags] as the third argument to the RewriteRule directive. Flags is a comma-separated list, surround by square brackets, of any of the following flags:

'B' (escape backreferences)

Apache has to unescape URLs before mapping them, so backreferences will be unescaped at the time they are applied. Using the B flag, non-alphanumeric characters in backreferences will be escaped. For example, consider the rule:

 RewriteRule ^(.*)$ index.php?show=$1 

This will map /C++ to index.php?show=/C++. But it will also map /C%2b%2b to index.php?show=/C++, because the %2b has been unescaped. With the B flag, it will instead map to index.php?show=/C%2b%2b.

This escaping is particularly necessary in a proxy situation, when the backend may break if presented with an unescaped URL.

'chain|C' (chained with next rule)

This flag chains the current rule with the next rule (which itself can be chained with the following rule, and so on). This has the following effect: if a rule matches, then processing continues as usual - the flag has no effect. If the rule does not match, then all following chained rules are skipped. For instance, it can be used to remove the ``.www'' part, inside a per-directory rule set, when you let an external redirect happen (where the ``.www'' part should not occur!).

'cookie|CO=NAME:VAL:domain[:lifetime[:path[:secure[:httponly]]]]' (set cookie)

This sets a cookie in the client's browser. The cookie's name is specified by NAME and the value is VAL. The domain field is the domain of the cookie, such as '.apache.org', the optional lifetime is the lifetime of the cookie in minutes, and the optional path is the path of the cookie. If secure is set to 'secure', 'true' or '1', the cookie is only transmitted via secured connections. If httponly is set to 'HttpOnly', 'true' or '1', the HttpOnly flag is used, making the cookie not accessible to JavaScript code on browsers that support this feature.

'env|E=VAR:VAL' (set environment variable)

This forces an environment variable named VAR to be set to the value VAL, where VAL can contain regexp backreferences ($N and %N) which will be expanded. You can use this flag more than once, to set more than one variable. The variables can later be dereferenced in many situations, most commonly from within XSSI (via <!--#echo var="VAR"-->) or CGI ($ENV{'VAR'}). You can also dereference the variable in a later RewriteCond pattern, using %{ENV:VAR}. Use this to strip information from URLs, while maintaining a record of that information.

'forbidden|F' (force URL to be forbidden)

This forces the current URL to be forbidden - it immediately sends back a HTTP response of 403 (FORBIDDEN). Use this flag in conjunction with appropriate RewriteConds to conditionally block some URLs.

'gone|G' (force URL to be gone)

This forces the current URL to be gone - it immediately sends back a HTTP response of 410 (GONE). Use this flag to mark pages which no longer exist as gone.

'handler|H=Content-handler' (force Content handler)

Force the Content-handler of the target file to be Content-handler. For instance, this can be used to simulate the mod_alias directive ScriptAlias, which internally forces all files inside the mapped directory to have a handler of ``cgi-script''.

'last|L' (last rule)

Stop the rewriting process here and don't apply any more rewrite rules. This corresponds to the Perl last command or the break command in C. Use this flag to prevent the currently rewritten URL from being rewritten further by following rules. Remember, however, that if the RewriteRule generates an internal redirect (which frequently occurs when rewriting in a per-directory context), this will reinject the request and will cause processing to be repeated starting from the first RewriteRule.

'next|N' (next round)

Re-run the rewriting process (starting again with the first rewriting rule). This time, the URL to match is no longer the original URL, but rather the URL returned by the last rewriting rule. This corresponds to the Perl next command or the continue command in C. Use this flag to restart the rewriting process - to immediately go to the top of the loop. Be careful not to create an infinite loop!

'nocase|NC' (no case)

This makes the Pattern case-insensitive, ignoring difference between 'A-Z' and 'a-z' when Pattern is matched against the current URL.

'noescape|NE' (no URI escaping of output)

This flag prevents mod_rewrite from applying the usual URI escaping rules to the result of a rewrite. Ordinarily, special characters (such as '%', '$', ';', and so on) will be escaped into their hexcode equivalents ('%25', '%24', and '%3B', respectively); this flag prevents this from happening. This allows percent symbols to appear in the output, as in

RewriteRule /foo/(.*) /bar?arg=P1\%3d$1 [R,NE]

which would turn '/foo/zed' into a safe request for '/bar?arg=P1=zed'.

'nosubreq|NS' (not for internal sub-requests)

This flag forces the rewriting engine to skip a rewriting rule if the current request is an internal sub-request. For instance, sub-requests occur internally in Apache when mod_include tries to find out information about possible directory default files (index.xxx files). On sub-requests it is not always useful, and can even cause errors, if the complete set of rules are applied. Use this flag to exclude some rules.

To decide whether or not to use this rule: if you prefix URLs with CGI-scripts, to force them to be processed by the CGI-script, it's likely that you will run into problems (or significant overhead) on sub-requests. In these cases, use this flag.

'proxy|P' (force proxy)

This flag forces the substitution part to be internally sent as a proxy request and immediately (rewrite processing stops here) put through the proxy module. You must make sure that the substitution string is a valid URI (typically starting with http://hostname) which can be handled by the Apache proxy module. If not, you will get an error from the proxy module. Use this flag to achieve a more powerful implementation of the ProxyPass directive, to map remote content into the namespace of the local server.

Note: mod_proxy must be enabled in order to use this flag.

'passthrough|PT' (pass through to next handler)

This flag forces the rewrite engine to set the uri field of the internal request_rec structure to the value of the filename field. This flag is just a hack to enable post-processing of the output of RewriteRule directives, using Alias, ScriptAlias, Redirect, and other directives from various URI-to-filename translators. For example, to rewrite /abc to /def using mod_rewrite, and then /def to /ghi using mod_alias:

RewriteRule ^/abc(.*) /def$1 [PT]
Alias /def /ghi

If you omit the PT flag, mod_rewrite will rewrite uri=/abc/... to filename=/def/... as a full API-compliant URI-to-filename translator should do. Then mod_alias will try to do a URI-to-filename transition, which will fail.

Note: You must use this flag if you want to mix directives from different modules which allow URL-to-filename translators. The typical example is the use of mod_alias and mod_rewrite.

The PT flag implies the L flag: rewriting will be stopped in order to pass the request to the next phase of processing.

'qsappend|QSA' (query string append)

This flag forces the rewrite engine to append a query string part of the substitution string to the existing string, instead of replacing it. Use this when you want to add more data to the query string via a rewrite rule.

'redirect|R [=code]' (force redirect)

Prefix Substitution with http://thishost[:thisport]/ (which makes the new URL a URI) to force a external redirection. If no code is given, a HTTP response of 302 (MOVED TEMPORARILY) will be returned. If you want to use other response codes, simply specify the appropriate number or use one of the following symbolic names: temp (default), permanent, seeother. Use this for rules to canonicalize the URL and return it to the client - to translate ``/~'' into ``/u/'', or to always append a slash to /u/user, etc.
Note: When you use this flag, make sure that the substitution field is a valid URL! Otherwise, you will be redirecting to an invalid location. Remember that this flag on its own will only prepend http://thishost[:thisport]/ to the URL, and rewriting will continue. Usually, you will want to stop rewriting at this point, and redirect immediately. To stop rewriting, you should add the 'L' flag.

While this is typically used for redirects, any valid status code can be given here. If the status code is outside the redirect range (300-399), then the Substitution string is dropped and rewriting is stopped as if the L flag was used.

'skip|S=num' (skip next rule(s))

This flag forces the rewriting engine to skip the next num rules in sequence, if the current rule matches. Use this to make pseudo if-then-else constructs: The last rule of the then-clause becomes skip=N, where N is the number of rules in the else-clause. (This is not the same as the 'chain|C' flag!)

'type|T=MIME-type' (force MIME type)

Force the MIME-type of the target file to be MIME-type. This can be used to set up the content-type based on some conditions. For example, the following snippet allows .php files to be displayed by mod_php if they are called with the .phps extension:

RewriteRule ^(.+\.php)s$ $1 [T=application/x-httpd-php-source]

Here are all possible substitution combinations and their meanings:

Inside per-server configuration (httpd.conf)
for request ``GET /somepath/pathinfo'':

Given Rule                                      Resulting Substitution
----------------------------------------------  ----------------------------------
^/somepath(.*) otherpath$1                      invalid, not supported

^/somepath(.*) otherpath$1  [R]                 invalid, not supported

^/somepath(.*) otherpath$1  [P]                 invalid, not supported
----------------------------------------------  ----------------------------------
^/somepath(.*) /otherpath$1                     /otherpath/pathinfo

^/somepath(.*) /otherpath$1 [R]                 http://thishost/otherpath/pathinfo
                                                via external redirection

^/somepath(.*) /otherpath$1 [P]                 doesn't make sense, not supported
----------------------------------------------  ----------------------------------
^/somepath(.*) http://thishost/otherpath$1      /otherpath/pathinfo

^/somepath(.*) http://thishost/otherpath$1 [R]  http://thishost/otherpath/pathinfo
                                                via external redirection

^/somepath(.*) http://thishost/otherpath$1 [P]  doesn't make sense, not supported
----------------------------------------------  ----------------------------------
^/somepath(.*) http://otherhost/otherpath$1     http://otherhost/otherpath/pathinfo
                                                via external redirection

^/somepath(.*) http://otherhost/otherpath$1 [R] http://otherhost/otherpath/pathinfo
                                                via external redirection
                                                (the [R] flag is redundant)

^/somepath(.*) http://otherhost/otherpath$1 [P] http://otherhost/otherpath/pathinfo
                                                via internal proxy

Inside per-directory configuration for /somepath
(/physical/path/to/somepath/.htacccess, with RewriteBase /somepath)
for request ``GET /somepath/localpath/pathinfo'':

Given Rule                                      Resulting Substitution
----------------------------------------------  ----------------------------------
^localpath(.*) otherpath$1                      /somepath/otherpath/pathinfo

^localpath(.*) otherpath$1  [R]                 http://thishost/somepath/otherpath/pathinfo
                                                via external redirection

^localpath(.*) otherpath$1  [P]                 doesn't make sense, not supported
----------------------------------------------  ----------------------------------
^localpath(.*) /otherpath$1                     /otherpath/pathinfo

^localpath(.*) /otherpath$1 [R]                 http://thishost/otherpath/pathinfo
                                                via external redirection

^localpath(.*) /otherpath$1 [P]                 doesn't make sense, not supported
----------------------------------------------  ----------------------------------
^localpath(.*) http://thishost/otherpath$1      /otherpath/pathinfo

^localpath(.*) http://thishost/otherpath$1 [R]  http://thishost/otherpath/pathinfo
                                                via external redirection

^localpath(.*) http://thishost/otherpath$1 [P]  doesn't make sense, not supported
----------------------------------------------  ----------------------------------
^localpath(.*) http://otherhost/otherpath$1     http://otherhost/otherpath/pathinfo
                                                via external redirection

^localpath(.*) http://otherhost/otherpath$1 [R] http://otherhost/otherpath/pathinfo
                                                via external redirection
                                                (the [R] flag is redundant)

^localpath(.*) http://otherhost/otherpath$1 [P] http://otherhost/otherpath/pathinfo
                                                via internal proxy